Steps To Use Windshield Repair Kits
Windshield repair kits work very well for fixing the damage done by a small bit of rock chipping the glass. They will not work so wonderfully on a crack spreading across the screen. No matter what sort of difficulty you have to deal with, it needs to be done in the shade. If the glass gets too warm, the resin may dry before you can work it.
The initial order of business is to pick all the remaining fragments of glass from the chip by use of a razor blade. After you have gotten the fragments out this way, use cloth and a cleaner for glass to clean the area up. It must be allowed to dry totally before you go on.
Position the suction cup tool from the kit so that the center part is just above the problem zone. Hand screw the repair tube tightly into this center part. The end of the tube has to be right over the problem zone. Sit inside your car to make sure that you have positioned the tube in exactly the right position.
After opening the resin tube, put about four drops of it down the tube used for repair. Quickly shove the plunger into the tube for repair. Thread it nearly all the way down. This is what will push the resin into the chipped glass. Screw it down into further tightening becomes difficult. Loosen it up for a moment so any air can escape, and then screw it back down once again.
Let the resin dry somewhat for a minute and then remove the suction cup in its entirety. Again waste no time before putting a piece of the finishing film over the resin. Use the razor blade to squeeze the resin towards the borders of the film. A piece of tape will keep the film in place while the resin is drying.
The resin has to be utterly dry before the film can come off. Wait at least ten minutes. If you fail to wait long enough, you may have to go through the process of putting on another resin drop and piece of finishing film. The repair zone may be cleaned through scrapes with a razor blade. You have done the work well once it can no longer be seen.
Windshield repair kits are supposed to make the glass appear to have never been nicked in the first place. You may not be happy with your initial attempt. You can do these steps over as many times as you like. The goal is to have the resin blend perfectly into the smoothness and surface level of the glass.
Looking to find the definitive source of information on windshield repair kits?
Filed under Cars by 
Leave a Comment